BC, C and P threading comb inserts are multi-tooth products for selected thread-cutting systems. They are selected by family, tooth count, dimensions and holder compatibility.
Product Overview
Ordering code
Family
Key dimensions
Application note
BC5BI1-2
BC
Teeth = 2; L = 16.2; H = 16.15; T = 5.49
Threading comb insert; 2-tooth form
C5BE1-3
C
Teeth = 3; L = 17.22; H = 15.08; T = 5.44
Threading comb insert; confirm tooth count
C5BE1-4
C
Teeth = 3; L = 17.22; H = 15.44; T = 5.44
Threading comb insert; confirm tooth count
C5BE2-3
C
Teeth = 3; L = 17.22; H = 15.33; T = 5.44
Threading comb insert; confirm tooth count
C8E1-3
C
Teeth = 3; L = 16.26; H = 15.67; T = 5.59
Threading comb insert; confirm tooth count
C8I1-4
C
Teeth = 4; L = 16.26; H = 16.64; T = 5.59
Threading comb insert; confirm tooth count
C8I1-7
C
Teeth = 7; L = 25.91; H = 16.51; T = 5.59
Threading comb insert; confirm tooth count
P5BI1-5
P
Teeth = 5; L = 25.78; H = 16.26; T = 5.59
Threading comb insert; 5-tooth form
Selection Requirements
Confirm comb family and the required number of teeth.
Confirm overall length, height, thickness and compatible holder.
Provide the current insert or tool drawing for cross-reference.
Availability is confirmed by complete type and project quantity.
Grade & Coating Selection
The insert ordering code defines the geometry and dimensions. The coating is selected through the JetEdge grade according to the workpiece material and cutting condition.
ISO material
Recommended grade direction
Coating route
Selection note
P Steel
JE7025P general / JE7015P precision
PVD
Select by stability, pitch or groove load
M Stainless steel
JE6025M general / JE6015M finishing / JE6035M tougher conditions
PVD
Prioritize edge sharpness and stable chip evacuation
K Cast iron
JE4025K general / JE4015K finishing
CVD
Confirm continuous or interrupted condition
S Heat-resistant alloys
JE5025S general / JE5015S finishing
PVD
Confirm heat, coolant and interruption conditions
Grade availability for each insert family is subject to confirmation.
Before ordering: send the complete current model, holder/tool drawing, tooth count, thread requirement, material and required quantity.
