GF038001 and GF043001 are listed notch inserts for selected compatible tool systems. They are not presented as general interchangeable grooving inserts and require holder and availability confirmation.
Product Overview
Ordering code
Key dimensions
Application note
GF038001
L = 38.5 mm; W = 8.4 mm; T = 4.0 mm; d = 4.6 mm
Selected notch insert; holder and availability confirmation required
GF043001
L = 43.5 mm; W = 8.4 mm; T = 4.8 mm; d = 4.3 mm
Selected notch insert; holder and availability confirmation required
Selection Requirements
Confirm the complete current insert designation and compatible holder.
Confirm approach direction and the workpiece drawing or notch dimensions.
Provide the current complete insert model or dimensional drawing.
Availability, grade and lead time are confirmed by project.
Grade & Coating Selection
The insert ordering code defines the geometry and dimensions. The coating is selected through the JetEdge grade according to the workpiece material and cutting condition.
ISO material
Recommended grade direction
Coating route
Selection note
P Steel
JE7025P general / JE7015P precision
PVD
Select by stability, pitch or groove load
M Stainless steel
JE6025M general / JE6015M finishing / JE6035M tougher conditions
PVD
Prioritize edge sharpness and stable chip evacuation
K Cast iron
JE4025K general / JE4015K finishing
CVD
Confirm continuous or interrupted condition
S Heat-resistant alloys
JE5025S general / JE5015S finishing
PVD
Confirm heat, coolant and interruption conditions
Grade availability for each insert family is subject to confirmation.
Before ordering: send the complete existing model, holder drawing, workpiece profile, material, quantity and current problem.
